0-10V Dimming

- Sep 04, 2018-

The first and simplest electronic lighting control signaling system, low voltage 0-10V dimmers use a low voltage 0-10V DC signal connected to each LED power supply or Fluorescent ballast. At 0 Volts the device will dim to the minimum light level allowed by the dimming driver, and at 10 Volts the device will be operating at 100%. A 0-10V dimmer is considered analog dimming, and all USAI 0-10V dimming options are considered to be "sink" type dimming. A typical 0-10V wiring diagram is shown below: