Model | OTM-TD30-PH12 | OTM-TD30-PH24 | |
Certificates | FCC UL cUL Class 2 | FCC UL cUL Class 2 | |
Output | DC Voltage | 12V | 24V |
Adj. Voltage Range | 10-13V | 21.5-25.5V | |
Rated Current | 2.5A | 1.25A | |
Rated Power | 30W | ||
Voltage Tolerance | ±0.5V | ||
Voltage Regulation | ±0.5% | ||
Load Regulation | ±1% | ||
±1% | |||
Input | Voltage Range | 100-277VAC | |
Frequency Range | 47-63Hz | ||
Power Factor(Typ.)@ full load | 0.99@120VAC 0.98@277VAC | 0.99@120VAC 0.97@277VAC | |
THD(Typ.)@ full load | <20% | ||
Efficiency(Typ.)@ full load | 79% | 79% | |
AC Current(Max.) | 0.5A@100VAC | ||
Inrush Current (Typ.) | 7A, 50%, 420us | ||
Leakage current | <0.50mA | ||
Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
Over Loading | ≤120% shut down o/p voltage, re-power on to recover | ||
Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
Working Humidity | 20~90%RH, non-condensing | ||
Storage TEMP. Humidity | -40~+80℃,10~95%RH | ||
TEMP .coefficient | ±0.03%/℃(0~50℃) | ||
Vibration | 10~500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
Safety& EMC | Safety standards | UL8750+UL1310 | |
Withstand voltage | I/P-O/P:1.88KVac | ||
Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
EMC EMISSION | FCC Part 15 B | ||
others | Net. Weight | 0.21Kg | |
Size | 155*54*20mm (L*W*H) | ||
packing | 40PCS/CTN | ||
385*335*200mm 20PCS/CTN | |||
Notes | 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃ of ambient temperature. | ||
2. To extend the driver's using life ,please reduce the loading at lower input voltage. |
Advantage
* CERTIFICATE : CE ETL SAA ROHS ect.
* R&D : 10-year professional and experienced R&D team
* CUSTOMIZED : Will customize for you based on your requirement.
* SERVICE : 24 hours stand by to wait for you.
* WARRABTY : 30000 hours (24hrs / day ) ; 50000 hours (24hrs / day )
User Manuel
a) Short circuit protection and overheat (renewable) protection are available in output end;
b) Recommend with trail edge dimmer, but the LED driver itself doesn’t have the dimmer function. It must connect with a dimmer to realize the function of dimming. However, the dimmer function is an option;
c) This LED driver could apply power for 10~15W LED load;
* If the LED load used with series-parallel mode, please concatenate a suitable current-limiting resistance in every series loop (figure 1);
* If the LED load used with series mode purely, LEDs must be connected in series in same polarity. Extra current-limiting resistance is unnecessary (figure 2).