96W 24V triac /phase cut dimmable constant voltage led driver for USA market ETL approved
Specifications
Model | OTM-TD96-PHW24 | |
Certificates | FCC UL cUL Class 2 | |
Output | DC Voltage | 24V |
Rated Current | 4A | |
Rated Power | 96W | |
Voltage Tolerance | ±0.5V | |
Voltage Regulation | ±0.5% | |
Load Regulation | ±1% | |
±1% | ||
Input | Voltage Range | 100-277VAC |
Frequency Range | 47-63Hz | |
Power Factor(Typ.)@ full load | 0.98@120VAC 0.96@277VAC | |
THD(Typ.)@ full load | <20% | |
Efficiency(Typ.)@ full load | 83% | |
79% | ||
AC Current(Max.) | 1.3A@100VAC | |
Inrush Current (Typ.) | 20A, 50%, 1.6ms | |
Leakage current | <0.50mA | |
Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed |
Over Loading | ≤120% constant current limiting, auto-recovery | |
Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | |
Environment | Working TEMP. | -40~+60℃ (see below derating curve) |
Working Humidity | 20~90%RH, non-condensing | |
Storage TEMP. Humidity | -40~+80℃,10~95%RH | |
TEMP .coefficient | ±0.03%/℃(0~50℃) | |
Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | |
Safety& EMC | Safety standards | UL8750+UL1310 |
Withstand voltage | I/P-O/P:1.88KVac | |
Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | |
EMC EMISSION | FCC Part 15 B | |
others | Net. Weight | 1.05Kg |
Size | 230*70*43mm (L*W*H) | |
packing | 10PCS/CTN | |
385*335*200mm 20PCS/CTN | ||
Notes | 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. | |
2. To extend the driver's using life ,please reduce the loading at lower input voltage. |
Feature
PWM output, does not change the color index
Full protection aluminum housing, for dry, damp, wet location
Compatible with Forward phase, Reverse phase, Triac, MLV, ELV Dimmers
Connecting Diagram