LED has proved to be the trend of next generation lighting for it's environment-friendly, energy-saving, light efficiency, reliablity. Pccooler's innovative LED heatsinks with the powerful head dissipation capability and reliablity greatly extend the LED lighting's lifespan, thus remarkable reduce the expense of lighting remarkable reduce the expense of lighting operation and maintenance.
PF≧0.97/200VAC PF≧0.97/230VAC PF≧0.97/240VAC(Full loading)
Full Load Efficiency(Typ.)
AC Current (Max.)
shut down o/p voltage, re-power on to recover after fault condition is removed
≦120% shut down o/p voltage, re-power on to recover
≦ 1.2 *Iout
100℃± 10℃ shut down o/p voltage ,re-power on to recover
10-500Hz,2G 10min./1 cycle,period for 72min,each along X,Y,Z axes.
160*60*23mm for inner box ; 350*240*130mm for carton 40PCS/CTN
1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃ of ambient temperature.
2. Tolerance: includes set us tolerance, line regulation and load regulation.
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again
4. Loading range from 10% to 100%
1. By using the most power and efficient flood light heat sink. the completed LED light can work up to 50000 hours, save up to 80% energy, have better lighting characteristics than that of traditional halide lamp of 200W;
2. Massive fins for efficient cooling technology, rapidly trasfer the heat of the LED chips to the massive fins;
3. The entire housing coated by electrophoretic pait, excellent corrosion resistance;
4. Stainless steel screws and parts;
5. High voltage, low current, energy-saving, environment friendly;
6. Performance stability, high IP rating of water-proof and dust-proof;
7. Good apperance, small size and weight, flexible to install;
8. Columnar-structured heat radiator to dissipate heat from all directions.
Materials and process
1.Tempered glass panel to protect the lighting source, the transparent rate up to 93%;
2.1060 aluminum heat sink with "zipped-fins"technology, optimized airflow ductinside the housing;
3.The entire housing coated by electrophoretic pait, excellent corrosion resistance;
4.Stainless steel screws and parts.