Power Factor ( Typ.)
Full Load Efficiency(Typ.)
0.61A/110VAC, 0.58A/170VAC, 0.46A/220VAC, 0.41A/265VAC
Hiccup mode, recovers automatically after fault condition
<140VAC(90~135V) , <270VAC(170~265V)
10~500Hz,2G 10min./1 cycle,period for 60min.
each along X,Y,Z axes
Compliance toEN55015,EN61000-3-2 (>50%load)
Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11, EN61547
Alight industry level (surge4KV)
1. All parameters NOT specially mentioned are measured at 110V/230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor.
3. Tolerance:includes set us tolerance,line regulation and load regulation.
Compliance to worldwide safety regulations for lighting
Strong compatibility, flicker-free dimming
Work with leading edge and trailing edge
60W triac dimmable driver Mechanical Specification
※Input Brown with AC (L),Blue with AC(N)
※Output Red is（DIM+）,Black is（DIM-）
※Note: Any other requests we can customized.
Shipping and packing
What is the ways of triac dimmable led driver
1. Convenient wiring ‘Dimming function can be realized only by cutting the triac dimming device on the AC terminal L line or one of the N lines, but the driver power supply must support the triac dimming function!
2, triac dimming domestic and international applications are still relatively extensive, mainly in the installation process, the use of wiring is simple, saves labor costs for the project; especially in foreign countries, labor costs are very high, the use of triac dimming more .
Disadvantages of triac dimming: 1. There is interference to the power grid; 2. The controller is not standardized and there is no standard)
2.What is a leading edge dimmer? What is a trailing edge dimmer?
The operating mode of the leading edge dimmer is to achieve the effect of dimming by changing the
voltage waveform through the thyristor device. The leading edge dimmer will have a little noise when
dimming! Unstable input voltage will affect the dimming effect! This is a matter of concern. (At home and abroad are basically the same, leading-edge dimming is a bit loud noise); trailing edge dimmer works by changing the voltage waveform through the MS tube to achieve dimming, the circuit layout is relatively complex and relatively high cost, the advantage is the input voltage Unstable, will not affect the dimming effect; no sound when dimming