FCC UL cUL
FCC UL cUL
Power Factor（Typ.）@ full load
THD（Typ.）@ full load
Efficiency（Typ.）@ full load
Inrush Current （Typ.）
20A, 50%, 1.6ms
shut down o/p voltage, re-power on to recover after fault condition is removed
≤120% constant current limiting, auto-recovery
100℃±10℃ shut down o/p voltage, automatically recover after cooling.
-40～+60℃ (see below derating curve)
Storage TEMP. Humidity
10～500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes
FCC Part 15 B
1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃ of ambient temperature.
2. To extend the driver's using life ,please reduce the loading at lower input voltage.
Good quality with competitive price
International wide range input
Protections:Short circuit/Overload/Over Temp
100%Full load Burn-in Test
Natural air cooling
Suitable for drying,wet,the rain environment
Suit for the 4KV resistance level
Waterproof design for indoor and outdoor use
Suitable for all kinds of LED lighting,street lighting.moving sign applications.
Other functions can be designed according to your requirement.
Storage and transport
1.Protect the driver from moisture and shaking when packing.
2.Stored in indoor warehouse with temperature <35℃ and humidity ≤75%.
3.Protect the driver from rain, water logging and strong shaking when transporting.
There are four wires, the two white wire is the input wire connected to AC power, the red and black wire at the other side is output wire, the red one connects anode and the black one connects cathode
1.Can i get a discount price:
We can allow you good discount according to your bulk order quantity.
2.Can you supply the connection instruction or drawing for us?
Yes, we can send you drawing of how to connect the led driver with the led lamp.
3.What IC you use?
We use Silergy, NSC and Fairchild, Siland
Welcome to our company for visit !!!