12W 12V 24V Triac dimming /phase cut constant voltage IP20 plastic led driver unit
Model | OTM-TD12W-12 | OTM-TD12W-24 | |
Output | DC Voltage | 12V | 24V |
Voltage Accuracy | ±3% | ||
Rated current | 1A | 0.5A | |
Rated power | 20W | ||
Input | Voltage Range | 180~250V AC (100-130V DC can customized ) | |
Frequency Range | 47~63HZ | ||
Power Factor ( Typ.) | PF ≥ 0.95/180V PF ≥ 0.93/220V PF ≥ 0.90/250V | ||
Full Load Efficiency(Typ.) | 84% | 85% | |
AC Current(Typ.) | 0.14A/180VAC 0.11 A/220VAC 0.095A/265VAC | ||
Leakage current | < 0.75mA/220VAC | ||
Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition | |
is removed. | |||
Over voltage | ≥ 270VAC | ||
Environment | Working TEMP. | -40~+60°C | |
Working Humidity | 20~90%RH,non-condensing | ||
Storage TEM.,Humidity | -40~+80°C,10~95%RH | ||
TEMP.coefficient | ±0.03%/°C(0~50°C) | ||
Vibration | 10~500Hz,2G 10min./1 cycle,period for 60min. | ||
each along X,Y,Z axes | |||
Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 | |
Withstand voltage | I/P-O/P:3.75KVAC | ||
Isolation resistance | I/P-O/P:100MΩ/500VDC/25°C/70%RH | ||
EMC EMISSION | EN55015,EN61000-3-2,3 ( ≥ 50%loading) | ||
EMC IMMUNITY | EN61000-4-2,3,4,5,6,11(Surge 4KV) | ||
Others | Weight | 0.69Kg | |
Size | 94*36*17mm(L*W*H) | ||
packing | 320*280*215mm 50pcs/each carton | ||
Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°Cof ambient temperature. | ||
2. Ripple& noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. | |||
3. Tolerance:includes set us tolerance,line regulation and load regulation. |
Features
1.Fireproof environmental protection PC plastic cover
2.Work with leading edge and trailing edge TRAIC dimmers
3.Built-in Passive PFC function
4.Dimming range from 0-100%, noise free, flicker free
5.Cooling be free air convection
6.Suitable for indoor LED lighting applications
7.100%full load burn-in test for more than 24hours
8.CE & SAA certifications
Working environment
• Make sure work in proper environments are stated in this Guide.
• Do not overload.
• Avoid free of load while a power supply is powered on, keep proper loading
• Always keep good ventilation
• Do not mount on wood or flammable surface, keep minimum 5CM for LED power supplies each other.
• Keep away from inflammable or explosive environments.
Applications
*Office lighting, Artwork lighting, Display case
*Home lighting
*Hotel, Restaurant lighting