Features of LED dimming driver DALI dimmable constant voltage 30W 24V led dali dimming driver with 3 years warranty
· Output constant voltage
· Range 100-265VAC
· Built-in PFC function
· Efficiency 89%
· Protections:short circuit/over voltage
· Fully isolated plastic case
· Easy installation
· Cooling by free air convection
· Dimming function: DALI with better compatibility
· Suitable for LED lighting applications by PWM output
· Compliance to worldwide safety regulations for lighting
· Suitable for dry/damp/wet locations
Mechanical Specification of LED dimming driver DALI dimmable constant voltage 30W 24V led dali dimming driver with 3 years warranty
Input with Live Wire(L) Neutral Wire (N)
Output LED SEC output Positive(LED+),output negative(LED-).Connected to LED Lamps.
Signal Dimming (DA1), (DA2) DALI Non polar Connected to the BUS of the DALI Master.
When installing the LED driver and making input and output connections, cross- section area of conductor for input and output terminal block:0.75mm²(cord type: H03VVH2-F or H03VV-F).
Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
1.Connect the Dali signal line to the Dali bus of the controller (the Dali Master).
2.After Dali Master scanning and address assignment, the driver can be successfully dimmed.
Please refer to Diagram 1
3.Notice:In the market, some DALI controllers has bus-powered functions .If not,please add an extra power supply.(DALI Power).
4.Any incorrect connecting of signal line and output line would damage the master.