Model | OTM-PD120350 | |
Output | DC Current | 350mA |
Current Tolerance | ±3% | |
Output voltage range | 72-120V | |
Rated power | 42W | |
Input | Voltage Range | 100~265VAC |
Frequency Range | 47~63HZ | |
Power Factor ( Typ.) | PF≥0.92 | |
Efficiency(Typ.) | >87% | |
AC Current(Typ.) | 0.24A | |
Leakage current | <0.7mA | |
Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed |
Over Loading | ≤120% | |
Over Current | ≤1.4*Iout | |
Environment | Working TEMP. | -40~+60℃ |
Working Humidity | 20~95%RH non-condensing | |
Storage TEMP.,Humidity | -40~+80℃,10~95%RH | |
TEMP.coefficient | ±0.03%/℃(0~50℃) | |
Vibration | 10~500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes | |
Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 |
Withstand voltage | I/P-O/P:3.75KVAC | |
Isolation resistance | I/P-O/P:100M Ohms/500VDC/25℃/70%RH | |
EMC EMISSION | Compliance to EN55015,EN61000-3-2 (≧60%load) | |
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6, 11, EN61547, light industry | |
Level(surge 4KV) Criteria A | ||
Others | Net.Weight | 0.55Kg |
Size | 180*60*35mm(L*W*H) | |
packing | 355*215*215mm/20pcs /CTN | |
Notes | 1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature. 2. Tolerance:includes set up tolerance,line regulation and load regulation. 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |
•Supply Voltage: 100-265Vac or 71-120Vdc
•100,000Hour Life @ Tc=75℃
•3 Year Warranty @ Tc<=75℃
•AirsetTM NFC Programmability
•+/-2% Output Current Accuracy
•0-10V/PWM/Time Dimmable
•Dim Off with 0.5W Standby Power
•350mA Auxiliary Power to Power Controllers and Fans
FAQ
Helpful Tips for a Better LED Driver Solution
Q1: How to select a suitable driver from the first point?
Firstly, forward current and power of a LED module is necessary. These could give an initial judge on the driver selection. The next step would be other required features depending on the application, like surge protection level, waterproof level etc.
Q2: What is dimming via 0-10V/PWM/Timer?
0-10V function can be controlled by active dimmer or passive resistor;
PWM function can be controlled by PWM generator;
Timer control can intelligently and autonomously manage light of LED source, using the multistep pre-programming scheme which is more convenient for filed application and energy-saving.
Q3: What is SELV?
SELV stands for safety extra-low voltage.
Following is the definition from IEC60598-1:
A voltage which does not exceed 50 V a.c. r.m.s. between conductors, or between any conductor and earth, in a circuit which is isolated from the supply mains by means such as a safety isolating transformer or converter with separate windings.