Output voltage range
Power Factor ( Typ.）
Hiccup mode, recovers automatically after fault condition is removed
10～500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes
Compliance to EN55015,EN61000-3-2 (≧60%load)
Compliance to EN61000-4-2,3,4,5,6, 11, EN61547, light industry
Level(surge 4KV) Criteria A
1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature.
2. Tolerance:includes set up tolerance,line regulation and load regulation.
3. The power supply is considered as a component that will be operated in combination with final Equipment.
Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.
1. 3 years warranty (5 years design)
3. High efficiency up to 87%
4. No pulsation
5. Lightning protection (Alternative)
6. 0-10v dimmable is available
0-10v dimmable is available
Waterproof connector (Alternative or customized)
• Make sure work in proper environments are stated in this Guide.
• Do not overload.
• Avoid free of load while a power supply is powered on, keep proper loading
• Always keep good ventilation
• Do not mount on wood or flammable surface, keep minimum 5CM for LED power supplies each other.
• Keep away from inflammable or explosive environments.