Power Factor ( Typ.）
Hiccup mode, recovers automatically after fault condition is removed
Storage TEMP., Humidity
10～500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
I/P-O/P I/P-FG O/P-FG：100M Ohms/500VDC/25℃/70%RH
Compliance to EN55015,EN61000-3-2 (≥60%load)
Compliance to EN61000-4-2,3,4,5,6,11, EN61547, light industry
Level(surge 4KV) Criteria A
1. All parameters NOT specially mentioned are measured at 220VAC input , rated load and 25℃ of ambient temperature.
2. Tolerance: includes set up tolerance, line regulation and load regulation.
3. The power supply is considered as a component that will be operated in combination with final Equipment.
Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.
Dimming type: 0-10v led power supply; AC-DC Dimmable LED power supplly
1.waterproof rate: IP67
2.High reliability, Dualiable operation.
3.Cooling by nature.
4.100% full load burn-in test
5.Protections: Short circuit / Overload / Over voltage / Over temperature
6.Current Limit : ±5% rated output current
7.Protection type : Constant Voltage limiting type; Shut down o/p voltage, re-power on to recover
8.Over Voltage : Shut down and latch off o/p voltage, re-power on to recover
9.Over Temperature : 85°C±10°C
Our products are widely used in various industries, such as
•indoor/outdoor LED illuminating lights,
•LED urban Decoration
•LED Lighting Advertising,
•Safety Protection Apparatus,
•Vehicle Lights, Controller Panels, etc.
Shipping and packing