Power Factor ( Typ.）
Hiccup mode, recovers automatically after fault condition is removed
10～500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
I/P-O/P I/P-FG O/P-FG：100M Ohms/500VDC/25℃/70%RH
Compliance to EN55015,EN61000-3-2 (≧60%load)
Compliance to EN61000-4-2,3,4,5,6,11, EN61547, light industry
Level(surge 4KV) Criteria A
1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature.
2. Tolerance:includes set up tolerance,line regulation and load regulation.
3. The power supply is considered as a component that will be operated in combination with final Equipment.
Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.
•Ultra High Efficiency (Up to 86%)
•Constant voltage Output
•Input Surge Protection: 6kV line-line, 10kV line-earth
•All-Around Protection: OVP, SCP, OTP
•Suitable for Independent Use
The OTM-PD series is a 30W, constant-voltage IP66 LED driver that operates from
100-265 Vac input with excellent power factor. It is created for low bay, tunnel and street lights.
The high efficiency of these drivers and compact metal case enables them to run cooler, significantly
improving reliability and extending product life. To ensure trouble-free operation, protection is provided
against input surge, output over voltage, short circuit, and over temperature.
■ Mechanical Specification
※Built-in 3 in 1 dimming function, IP20 rated . Output constant current can be adjusted through output cable by connecting a resistance or 0/1-10Vdc or 10V PWM signal between DIM+ and DIM-.
※Please DO NOT connect “DIM-“ to “LED-“
※Load carried in accordance with the load derating curve, according to the ambient temperature derating, in order to extend the service life.