Power Factor ( Typ.）
Hiccup mode, recovers automatically after fault condition is removed
Storage TEMP., Humidity
10～500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
I/P-O/P I/P-FG O/P-FG：100M Ohms/500VDC/25℃/70%RH
Compliance to EN55015,EN61000-3-2 (≥60%load)
Compliance to EN61000-4-2,3,4,5,6,11, EN61547, light industry
Level(surge 4KV) Criteria A
1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature.
2. Tolerance: includes set up tolerance, line regulation and load regulation.
3. The power supply is considered as a component that will be operated in combination with final Equipment.
Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.
1. Sample fee: negotiable, sample can be supplied in 7 days.
2. High quality, complete kinds, good stability, strong practicability.
3. Good after-sales service & point to point technical supports.
4. Energy saving, long using life.
5. Widely used in hotel, office, hospital, market, home, outdoor, indoor, hall, stage, etc.
•1.When using the power supply, please pay attention to distinguishing the input and output terminal, and connect the wires correctly,then turn it on after making sure it is correct.
•2.Please firstly connect the load of DC output terminal, make sure it's correct and then turn on the power supply.
•3.Welding the power line to avoid other solder tin,tin,tin false,short circuit,all leads must avoid direct contact with the surface of capacitance.
•4.Using environment temperature must be in accordance with the specification requirements.
•5.When power assembly to the fixture,need to make an aging text more than 24hours according to the actual situation,to ensure the quality of the fixture product.