Power Factor ( Typ.）
Hiccup mode, recovers automatically after fault condition is removed
Storage TEMP., Humidity
10～500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes
Safety & EMC
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
I/P-O/P I/P-FG O/P-FG：100M Ohms/500VDC/25℃/70%RH
Compliance to EN55015,EN61000-3-2 (≥60%load)
Compliance to EN61000-4-2,3,4,5,6,11, EN61547, light industry
Level(surge 4KV) Criteria A
1. All parameters NOT specially mentioned are measured at 220VAC input , rated load and 25℃ of ambient temperature.
2. Tolerance: includes set up tolerance, line regulation and load regulation .
3. The power supply is considered as a component that will be operated in combination with final Equipment.
Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.
Note: 1. The above technical parameters are measured at 25 ℃.
2. Output voltage ripple and noise are under the condition of rated voltage and rated current, to use an oscilloscope of 20MHz bandwidth which connects to the output of the switching power supply, at the same time the output of the power supply parallels a 47uF electrolytic capacitor and a 0.1uF ceramic capacitor.
3. Measured power conversion efficiency is under the condition of the input AC220V, Output the maximum voltage and full load. If under the condition of the input AC110V, its efficiency will be lower 1-2%. the power supply worked 1-2 hours later ,its measured efficiency higher 1-2% than it just started working.
Between DIM + and DIM- ,to connect a 100K adjustable resistor or a 0-10V DC variable voltage or a 10V PWM duty cycle adjustable square wave adjusts the power supply so that the output current of the power supply is changed in the 0-100% (rated) range to achieve 0-100% dimming effect.
Shipping and packing
Packing in small box, 15pcs/carton.
1.Payment term: T/T 100% payment in advance. Or TT 30% deposit after order confirmed, the 70% final payment before delivery. Or Pay pal Money Gram Western Union for small amount .
2. Sample policy: Samples are always available for each mode. Sample of product can be ready in 3~7 days once payment received.
3. Shipping port: FOB Shenzhen, GD, China.