Model | OTM-PDW18012 | OTM-PDW18024 | OTM-PDW18036 | OTM-PDW18048 | |
Output | DC Voltage | 12V | 24V | 36V | 48V |
Voltage Tolerance | ±0.5V | ||||
Rated current | 0～15A | 0～7.5A | 0～5A | 0～3.75A | |
Rated power | 180W | ||||
Input | Voltage Range | 100～265VAC | |||
Frequency Range | 47～63HZ | ||||
Power Factor ( Typ.） | PF≥0.99 | ||||
Efficiency（Typ.） | ＞87% | ＞89% | ＞90% | ＞90% | |
AC Current（Typ.） | 1.06A | 1.03A | 1.02A | 1.02A | |
Leakage current | <0.7mA | ||||
Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed | |||
Over Loading | ≤120% | ||||
Over Current | ≤1.4*Iout | ||||
Environment | Working TEMP. | -40～+60℃ | |||
Working Humidity | 20～95%RH non-condensing | ||||
Storage TEMP., Humidity | -40～+80℃，10～95%RH | ||||
TEMP. coefficient | ±0.03%/℃（0～50℃） | ||||
Vibration | 10～500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes | ||||
Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 | |||
Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||||
Isolation resistance | I/P-O/P I/P-FG O/P-FG：100M Ohms/500VDC/25℃/70%RH | ||||
EMC EMISSION | Compliance to EN55015,EN61000-3-2 (≥60%load) | ||||
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,11, EN61547, light industry | ||||
Level(surge 4KV) Criteria A | |||||
Others | Net. Weight | 1.8Kg | |||
Size | 256*80*53mm（L*W*H） | ||||
packing | 440*295*145mm/8pcs /CTN | ||||
Notes | 1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature. 2. Tolerance: includes set up tolerance, line regulation and load regulation. 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | ||||
100-256VAC(50/60Hz) Input;
Isolated topology,0/1-10V dimming,MCU program, dimming smoothly, good compatibillity and appearance;
High efficiency,high PF, good stability;
The copper wire of transformer is Grade F, resist high-temperature 155oC
Current accuracy: ±3%
Short circuit,over voltage, over current and over temperature protection
Cooling by natural air convection
Independent, Class 2 constant current type
Application for LED ceiling light,down light,panel lights and so on;
