Output voltage range
Power Factor ( Typ.）
Hiccup mode, recovers automatically after fault condition is removed
10～500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
I/P-O/P I/P-FG O/P-FG：100M Ohms/500VDC/25℃/70%RH
Compliance to EN55015,EN61000-3-2 (≧60%load)
Compliance to EN61000-4-2,3,4,5,6, 11, EN61547, light industry
Level(surge 4KV) Criteria A
1. All parameters NOT specially mentioned are measured at 220VAC input , rated load and 25℃ of ambient temperature.
2. Tolerance:includes set up tolerance,line regulation and load regulation .
3. The power supply is considered as a component that will be operated in combination with final Equipment.
Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.
1.No flicking,analog voltage DC 0/1-10V dimmer, active&passive 0/1-10v dimming general to use,can be compatible with the large control system structure to dim.
2.With short circuit protection,power protection,overheating protection function.
3.With the self-testing function.
1.Use of switching power supply power on before, please check whether the input and output lines connect to (alternating current (ac) line of fire, zero line, the grounding wire, dc voltage positive and negative), suggest using wire sectional area more than 0.75 mm copper wire; In order to ensure the safety of using and reduce interference, please ensure that grounding end is good reliable grounding.
2.When dimming,the output has the LED dimming instructions.
3.The 0-10V dimmer can cooperate with LUTRON and DYNALITE system.
Shipping and packing