Power Factor ( Typ.）
Hiccup mode, recovers automatically after fault condition is removed
10～500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes
Compliance to EN55015,EN61000-3-2 (≧60%load)
Compliance to EN61000-4-2,3,4,5,6, 11, EN61547, light industry
Level(surge 4KV) Criteria A
1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature
2. Tolerance:includes set up tolerance,line regulation and load regulation.
3. The power supply is considered as a component that will be operated in combination with final Equipment
Since EMC performance will be affected by the complete installation,the final equipment manufactures must be-qualify EMC Directive on the complete installation again.
Advantages of dimmable 45w led driver 0-10v
•1.The constant dc current output provides the long lifetime and optimum operation of high power led.
•2.Output voltage according to the load change.
•3.With different low current output, driver the led chip directly.
•4.High efficacy,multiple leds series, in parallel connection, or combination.
•5.Timing dimming,timing to turn off the lights function
•6.Have DAC(0-10v) interface, remote control system compatible
Push and hold to dim
• On/off control: short push (<1s) on the switch.
• Stepless dimming: long push (>1s) on the switch.
• For fine tuning of light level: with every other long push, the light level goes to the opposite direction.
• Built--in with permanent memory: light returns to the previous dimming level when switched off and on again, even at power failure.
Note:1. This “1-10V” output is isolated, SELV output.
2. “Switch-Dim” is prior to “1-10V”. To shift dimming from “Switch-Dim” to “1-10V”, the end-user should short-circuit“1-10V” first for at least 3s.